Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
Polyaniline/Fe3O4/Poly (Methyl Methacrylate) Nanocomposites as an Acrylic Resin Coating for Enhancement of Anticorrosion Properties of Alkyd Paints
209
220
EN
H.
Ghafouri Taleghani
Department of Chemical Engineering, University of Mazandarn, Babolsar, Iran
h.taleghani@umz.ac.ir
M.
Soleimani-Lashkenari
Fuel Cell Electrochemistry and Advanced Material Research Laboratory, Faculty of Engineering Modern Technologies, Amol University of Special Modern Technologies, Amol, Iran
m.soleimani@ausmt.ac.ir
Sh.
Fazli
Department of Chemical Engineering, Mazandaran University of Science & Technology, Babol, Iran
s.fazli@gmail.com
M.
Ghorbani
Department of Chemical Engineering, Babol Noshirvani University of Technolgy, Babol, Iran
m.ghorbani@nit.ac.ir
<em> The exceptional application of nanocomposites containing polyaniline as a conductive polymer, poly (methyl methacrylate) (PMMA) as an acrylic resin and Fe<sub>3</sub>O<sub>4</sub> nanoparticles, for corrosion protection of mild steel was reported. The synthesized nanocomposites, were characterized with different techniques. The resulting<strong> </strong>PMMA/Polyaniline/Fe<sub>3</sub>O<sub>4</sub> nanocomposites were mixed with industrial alkyd paint to be employed as an anti-corrosion layer for mild steel in a NaCl solution. Accordingly, the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were applied in order to investigate the corrosion behavior of the coated mild steel. Based on the results, the nanocomposites showed outstanding anti-corrosion properties compared with other composites coating. After investigating various compositions of the nanocomposites (3, 6, 9 and 12%) in the alkyd paint, the ideal composition related to the most favorable corrosion protection was obtained for the paint mixture comprising 6% nanocomposites. </em>
Polyaniline,Fe3O4 nanoparticles,PMMA,Anti-corrosion,Electrochemical impedance
https://www.ijnnonline.net/article_247639.html
https://www.ijnnonline.net/article_247639_df6ed1d61f65ad2572c4d0ac87a00b3d.pdf
Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
Evaluation of Anti-Biofilm Formation Effect of Nickel Oxide Nanoparticles (NiO-NPs) Against Methicillin-Resistant Staphylococcus Aureus (MRSA)
221
230
EN
A. M.
Rheima
0000-0003-3533-3393
Department of Chemistry, College of Science, Wasit University, Kut, Iraq
arahema@uowasit.edu.iq
M. F.
Al Marjani
Department of Biology, College of Science, Mustansiriyah University, Baghdad, Iraq
marjani20012001@gmail.com
M. F.
Aboksour
Department of Biology, College of Science, Mustansiriyah University, Baghdad, Iraq
mohammadfadhil@trientedu.edu
S. H.
Mohammed
Department of Chemistry, College of Education, University of Garmian, Kalar, Iraq
srwa.hashim@garmian.edu.krd
<em> In this project, Nickel oxide nanoparticles (NiO-NPs) have been synthesized by a photolysis method and assessed for their anti-biofilm activity. It is a strategy that is simple and inexpensive. The morphology and the average particle size was investigated by scanning electron microscope (SEM), transmitted electron microscope (TEM) and the crystallite size was calculated by (XRD) analysis. The XRD studies support the existence of NiO-NPs with a high degree of crystallinity. Their nickel oxide particle size was found to be around 13-31 nm. Forty-two samples of medical waste from different hospitals in Baghdad were between 2nd to 12th of October / 2020. Bacterial isolation results recorded fifteen Staphylococcus aureus isolates. Well diffusion method was used to determine of methicillin resistance S. aureus (MRSA), in addition to using the mecA gene as a molecular method to detection of methicillin resistance gene, the results of these both methods showed that the MRSA percentage of these two methods were 53.3% and 73.4% in well diffusion method and PCR respectively. Results of MRSA biofilm formation illustrated that only four isolates (36.3%) hadn’t the ability to produce biofilm by using microtiter plate assay (MTP). In contrast, the other isolates (63.7%) could produce biofilm and they were ranging from strong to week biofilm formation. Antimicrobial activity of different concentrations of NiO-NPs (10, 20, 30, 50, and 100 µg/ml) showed ranging of inhibition zones starting from 0 to 13 mm. In comparison, the MIC concentration was 265 µg/ml (63.7%) of seven MRSA isolates and 530 µg/ml (36.4%) of four isolates. Detection of hemolysis activities of NiO-NPs against human red blood cells (RBCs) was done. The results illustrate that the hemolytic activity was 2.38%, 2.23%, 2.41%, and 2.69% corresponding to 0, 0.01, 0.1, and 1 mg/ml of NiO-NPs.</em>
biofilm detection,antibiofilm activity,NiO-NPs,mecA,MRSA,Metal Oxide Nanoparticles,Hemolysis activity
https://www.ijnnonline.net/article_247640.html
https://www.ijnnonline.net/article_247640_6464fe176691cb3bf8dcc1c0f864fc57.pdf
Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
TiO2/hydrophobic Cellulose Aerogel Nanocomposite as a New Photocatalyst for Oxidation of Alcohols and Ethylbenzene
231
238
EN
S.
Hamzehzad
Department of Nanochemistry, Nanotechnology Research Center, Urmia University, Urmia, Iran
s_hamzezadeh@yahoo.com
S.
Keshipour
Department of Nanochemistry, Nanotechnology Research Center, Urmia University, Urmia, Iran
s.keshipour@urmia.ac.ir
<em> Synthesis of new natural polymers-based nanocomposites is the center of attentions for the catalyst researchers on account of their sustainability. In this regard, cellulose aerogel was hydrophobized by polysilicon to give a hydrophobic bio-support which underwent deposition of TiO<sub>2</sub> nanoparticles afforded a catalyst with high lipophilicity, superior porosity as well as high catalytic activity. The prepared nanocomposite was structurally characterized, in which the deposition of polysilicon and TiO<sub>2</sub> nanoparticles on an aerogel compound was recognized. The aerogel exhibited good hydrophobicity, and high selectivity in oil/water absorption with 6.3 g oil absorbed by 1 g of the absorbent. Finally, the nanocomposite was employed as a heterogeneous photocatalyst in the transformation of alcohols to aldehydes/ketones, and ethylbenzene to acetophenone with the conversions laying in the range of 81-99%. Mild conditions, high yields, excellent selectivities, and recyclability and biocompatibility of the catalyst are advantages of the reactions.</em>
Hydrophobic,Cellulose,Aerogel,photocatalyst,Oxidation,Green Chemistry
https://www.ijnnonline.net/article_247641.html
https://www.ijnnonline.net/article_247641_6e0fefd0e7e879aeb67fc4bdf832930c.pdf
Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
Rational Design of Phosphorus Abundant Co2P Nanoparticles Encapsulated by Nitrogen-doped Carbon Nanotubes for Superior Lithium Ion Capacitors with 4.5 Voltage
239
248
EN
J.
Xu
North China University of Water Resources and Electric Power, Zhengzhou 450000, PR China
xujuan@ncwu.edu.cn
H.
Guo
North China University of Water Resources and Electric Power, Zhengzhou 450000, PR China
guohaibin@ncwu.edu.cn
<em> The sluggish reaction kinetics and aggregation of volume during lithiation/delithiation process are the main obstacles of anode for li-ion capacitors (LICs). Here, we use the “three bird one stone” strategy to design the anode of phosphorus abundant Co<sub>2</sub>P nanoparticles encapsulated by N-doped CNTs rationally. The Co<sub>2</sub>P nanoparticles contribute to shorten the Li<sup>+</sup> diffusion length, while abundant phosphorus guaranteeing the high electrical conductivity and N-CNTs providing stable structure protecting layers. Hence, Co<sub>2</sub>P/N-CNTs electrode reveals a large specific capacity of 807 mAh g<sup>-1</sup> at 0.1 A g<sup>-1</sup> over 200 cycles and excellent rate performance of 395 mAh g<sup>-1</sup> at 3.2 A g<sup>-1</sup>. Extraordinary, the capacitive contribution of Co<sub>2</sub>P/N-CNTs electrode at 1 mV s<sup>-1</sup> is 80.73%, contributing to the enhanced reaction kinetics and rate capacity. The LICs comprising of Co<sub>2</sub>P/N-CNTs anode and activated carbon (AC) cathode demonstrate an outstanding energy density of 130 Wh kg<sup>-1</sup> at 625 W kg<sup>-1</sup> along with 90.24% capacity retention over 10000 cycles at 5 A g<sup>-1</sup> within 4.5 V. The proposed strategy can be applied to develop promising electrode materials for promising energy storage systems.</em>
Co2P/N-CNTs,Anode,three bird one stone,high rate capacity,high ratio of capacitive contribution capacity
https://www.ijnnonline.net/article_247642.html
https://www.ijnnonline.net/article_247642_87ae534249166fd472ff408cf5734203.pdf
Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
Antibacterial Characteristics of CuS Nanoplates Anchored onto g-C3N4 Nanosheets, Suspended in PMMA Matrix
249
260
EN
A.
Mirzaei
Heterocyclic Chemistry Research Laboratory, Department of Chemistry, Iran University of Science and Technology, Tehran 16846-13114, Iran
akbarmirzaey65800@gmail.com
R.
Peymanfar
0000-0001-9850-1118
Department of Chemical Engineering, Energy Institute of Higher Education,
Saveh 67746–39177, Iran
reza_peymanfar@alumni.iust.ac.ir
Shahrzad
Javanshir
Heterocyclic Chemistry Research Laboratory, Department of Chemistry, Iran University of Science and Technology, Tehran 16846-13114, Iran
shjavan@iust.ac.ir
Reza
Fallahi
Department of Chemical Engineering, Energy Institute of Higher Education, Saveh 67746– 39177, Iran
reza.jr2020@gmail.com
Javad
Karimi
Department of Chemical Engineering, Energy Institute of Higher Education, Saveh 67746– 39177, Iran
javad.karimi490@gmail.com
<em> Nowadays, due to bacterial antibiotic resistance, the design of new high-performance antibiotics to maintain human health has been a significant challenge.</em><em> Accordingly, </em><em>photothermal antibiotics have been developed based on semiconductor materials such as graphene. </em><em>Herein, copper sulfide (CuS) nanoplates and graphitic carbon nitride (g-C<sub>3</sub>N<sub>4</sub>)/CuS were synthesized as salient antibacterial agents and their antibacterial features were assessed using polymethyl methacrylate (PMMA) as a practical matrix. </em><em>The morphology and structure of nanostructures were characterized by X-ray diffraction (XRD), ultraviolet (UV)-visible (Vis) diffuse reflectance spectroscopy (DRS), and field emission scanning electron microscopy (FESEM). </em><em>Based on the results obtained by the UV-Vis light absorption, the </em><em>g-C<sub>3</sub>N<sub>4</sub>, CuS, and g-C<sub>3</sub>N<sub>4</sub>/CuS nanostructures illustrated strong absorptions in the visible light region while demonstrated 2.92, 1.20, and 0.27 eV band gaps, respectively.</em><em> </em><em>Eventually, the study of the antibacterial properties of the nanostructures exhibited that the zone of inhibition is augmented by anchoring the CuS nanoplates onto the g-C<sub>3</sub>N<sub>4</sub> surface. Interestingly, g-C<sub>3</sub>N<sub>4</sub>/CuS nanocomposite brought 12 and 17 mm zone of inhibitions </em><em>for</em><em> </em><em>Escherichia</em><em> coli </em><em>(E. coli) and </em><em>Staphylococcus</em><em> aureus</em><em> (S. aureus), respectively. More significantly, the results attested that inserting the g-C<sub>3</sub>N<sub>4</sub> nanostructures promote the antibacterial features of CuS nanoplates, originated from its nucleation effect boosting surface area to volume ratio of the sulfides, amplifying interfacial interaction, and elevating established reactive oxidative species (ROS) killing the bacteria. The presented research opens new windows toward augmenting the antibacterial features of biomedical polymers.</em>
Antibacterial Agent,CuS nanoplates,Graphitic carbon nitride (g-C3N4),Polymethyl methacrylate (PMMA),Nanocomposite,Optical performance
https://www.ijnnonline.net/article_247643.html
https://www.ijnnonline.net/article_247643_7c79ea68d7cb383ae35e499b629cb473.pdf
Iranian Nanotechnology Society
International Journal of Nanoscience and Nanotechnology
1735-7004
2423-5911
17
4
2021
11
01
In-vitro Biocompatibility Studies of Mint Oil-Vitamin D Nanoparticles
261
276
EN
F.
Ganchi
0000-0002-4883-5221
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
gfaisal78686@gmail.com
K.
Tungare
0000-0002-8130-4158
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
skanchan19@gmail.com
Sh.
Palamthodi
0000-0001-6684-399X
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
shanooba.pm@dypatil.edu
M.
Bhori
0000-0001-6493-1195
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
mustansir.bhori@dypatil.edu
J.
Aich
0000-0002-6180-3785
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
jyotirmoi.aich@dypatil.edu
Th.
Marar
0000-0002-0878-4335
School of Biotechnology and Bioinformatics, D. Y. Patil Deemed to be University, Plot No 50, Sector 15, CBD Belapur, Navi Mumbai, India
dr.marar@yahoo.com
<em> Mint, a medicinal plant has gained immense attention from food and pharmaceutical industries because of its numerous health benefits while treating </em><em>Vitamin D (Vit D) deficiency via recommended fortified food always remains the primary objective of nutritionists. We aimed to evaluate the biocompatible nature of our mint oil-Vit D encapsulated β-Cyclodextrin carbon-based nanoparticles before establishing their potential application in the medicine and food industry. The repercussion of different concentrations of nanoparticles was evaluated on various model systems (microbes, cell lines, erythrocytes, plant seeds and zebrafish embryos) and result obtained was subjected to statistical analysis. In our study, synthesized nanoparticles revealed no antimicrobial activity. The cytotoxicity and anticancer potential of the nanoparticles were studied using L929 and HeLa cell lines respectively at various concentrations and divulged the fact that these nanoparticles induce significant cell death at higher concentrations but remain non-detrimental at lower concentrations. Further, exposure of nanoparticles to RBCs presented a dose-dependent induction of hemolysis and lipid peroxide production. A similar trend of toxicity was evident in the zebrafish embryo as well at higher concentrations. Phytotoxicity analysis revealed no effect of nanoparticles on germination of seeds albeit the root and shoot length of seedlings were affected significantly. Overall, our results indicate high biocompatibility of these nanoparticles only at lower concentrations and their further applications in various industries should strictly consider minimal doses.</em>
Antimicrobial,Antioxidant,hemolysis,Mint oil,phytotoxicity,zebrafish
https://www.ijnnonline.net/article_247644.html
https://www.ijnnonline.net/article_247644_8a72d6f6bd5e263a674833d40ebedf25.pdf