International Journal of Nanoscience and Nanotechnology

International Journal of Nanoscience and Nanotechnology

Contemporary Advances in Metal Oxide Doped Polypyrrole Composites: A Comprehensive Review

Document Type : Research Paper

Authors
Nandini V. Iyer 1, 2
Ganesh L. Agawane 3
Chandan Patel 3
Jayant A. Kher 2
Shekhar D. Bhame 1
1 Symbiosis Institute of Technology, Symbiosis International (Deemed University), 412115, Lavale, Pune, India
2 Department of Applied Sciences, COEP Technological University, 411005, Pune, India
3 Department of Chemistry, Faculty of Science and Technology, JSPM University, 412207, Pune, India
10.22034/ijnn.2024.2005501.2391
Abstract
   Intrinsically conducting polymers (ICPs) have revolutionized materials science with their versatile applications in electronics, sensors, and energy storage. This review explores the synthesis, properties, and applications of polypyrrole (PPy) and its hybrid nanocomposites with metal oxides, emphasizing advancements in electrical conductivity, stability, and performance. PPy, a prominent conducting polymer, is synthesized through chemical polymerization or electrochemical methods and exhibits high conductivity and mechanical flexibility. Doping PPy with metal oxides like nickel oxide (NiO) and tungsten oxide (WO3) enhances its properties for various applications. PPy-NiO composites show improved conductivity and dielectric properties, while PPy-WO3 composites demonstrate superior electrochemical performance in supercapacitors. This review highlights recent advancements in synthesizing and characterizing these composites, including X-Ray Diffraction (XRD), Ultraviolet-Visible Spectroscopy (UV-VIS), and Raman Spectroscopy. The findings underscore the potential of PPy-metal oxide composites in advancing technologies such as energy storage, corrosion protection, and sensor development.
Keywords
Conducting Polymers
Polypyrrole
Metal Oxides
Doping
Electrical Properties

Subjects

  1. Walatka, V. V., Labes, M. M., Perlstein, J. H., “Polysulfur Nitride—a One-Dimensional Chain with a Metallic Ground State”, Rev. Lett., 31 (1973) 1139–1142. https://doi.org/10.1103/PhysRevLett.31.1139.
  2. Zaumseil, J., “P3HT and Other Polythiophene Field-Effect Transistors, Advances in Polymer Science”, Springer Berlin Heidelberg, (2014) 107–137. https://doi.org/10.1007/12_2014_279.
  3. Sharma, S., Sudhakara, P., Omran, A. A. B., Singh, J., Ilyas, R. A., “Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications”, Polymers (Basel), 13 (2021) 2898. https://doi.org/10.3390/polym13172898.
  4. Jamjoum, H. A. A., Umar, K., Adnan, R., Razali, M. R., Mohamad Ibrahim, M. N., “Synthesis, Characterization, and Photocatalytic Activities of Graphene Oxide/metal Oxides Nanocomposites: A Review”, Chem., 9 (2021). https://doi.org/10.3389/fchem.2021.752276.
  5. Nguyen, D., Yoon, H., “Recent Advances in Nanostructured Conducting Polymers: from Synthesis to Practical Applications”, Polymers (Basel), 8 (2016) 118. https://doi.org/10.3390/polym8040118.
  6. Holze, R., Wu, Y. P., “Intrinsically conducting polymers in electrochemical energy technology: Trends and progress”, Acta, 122 (2014) 93–107. https://doi.org/10.1016/j.electacta.2013.08.100.
  7. Ranjbar, M., Yousefi, M., “Sonochemical Synthesis and Characterization of a Nano-Sized Lead (II) Coordination Polymer; A New Precursor for the Preparation of PbO Nanoparticles”, Ultrasonics Sonochemistry, 20 (2016) 1254-1260.
  8. Hu, C., Li, T., Yin, H., Hu, L., Tang, J., Ren, K., “Preparation and corrosion protection of three different acids doped polyaniline/epoxy resin composite coatings on carbon steel”, Colloids Surf. A Physicochem. Eng. Asp., 612 (2021) 126069. https://doi.org/10.1016/j.colsurfa.2020.126069.
  9. Sathiyanarayanan, S., Azim, S., Venkatachari, G., “Preparation of polyaniline–TiO2 composite and its comparative corrosion protection performance with polyaniline”, Met., 157 (2007) 205–213. https://doi.org/10.1016/j.synthmet.2007.01.012.
  10. Castagno, K. R. L., Azambuja, D. S., Dalmoro, V., “Polypyrrole electropolymerized on aluminium alloy 1100 doped with oxalate and tungstate anions”, Appl. Electrochem., 39 (2009) 93–100. https://doi.org/10.1007/s10800-008-9640-1.
  11. Liras, M., Barawi, M., de la Peña O’Shea, V. A., “Hybrid materials based on conjugated polymers and inorganic semiconductors as photocatalysts: from environmental to energy applications”, Soc. Rev., 48 (2019) 5454–5487. https://doi.org/10.1039/C9CS00377K.
  12. Gao, F., Hou, X., Wang, A., Chu, G., Wu, W., Chen, J., Zou, H., “Preparation of polypyrrole/TiO2 nanocomposites with enhanced photocatalytic performance”, Particuology, 26 (2016) 73–78. https://doi.org/10.1016/j.partic.2015.07.003.
  13. Meng, Z., Mirica, K. A., “Covalent organic frameworks as multifunctional materials for chemical detection”, Soc. Rev., 50 (2021) 13498–13558. https://doi.org/10.1039/D1CS00600B.
  14. De Alvarenga, G., Hryniewicz, B. M., Jasper, I., Silva, R.J., Klobukoski, V., Costa, F. S., Cervantes, T. N. M., Amaral, C. D. B., Schneider, J. T., Bach-Toledo, L., Peralta-Zamora, P., Valerio, T. L., Soares, F., Silva, B. J. G., Vidotti, M., “Recent trends of micro and nanostructured conducting polymers in health and environmental applications”, Journal of Electroanalytical Chemistry, 879 (2020) 114754. https://doi.org/10.1016/j.jelechem.2020.114754.
  15. Anna B., Neerooa B. N. H. M., Hu Y., Ooi L., Shameli K., Chew J., Teow S., “Development of FDA-Approved Antibacterial Metal and Metal Oxide Nanoparticles: An Update”, J. Nanosc. Nanotechnol., 19 (2023) 209–235. https://doi.org/10.22034/ijnn.2023.1978122.2311.
  16. Hao L., Dong C., Zhang L., Zhu K., Yu D., “Polypyrrole Nanomaterials: Structure, Preparation and Application”, Polymers (Basel), 14 (2022) 5139. https://doi.org/10.3390/polym14235139.
  17. Le T., Yoon H., “Fundamentals of Conjugated Polymer Nanostructures. Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications”, Wiley, (2021) 1–42. https://doi.org/10.1002/9783527820115.ch1.
  18. Pang A.L., Arsad A., Ahmadipour M., “Synthesis and factor affecting on the conductivity of polypyrrole: a short review”, Adv. Technol., 32 (2021) 1428–1454. https://doi.org/10.1002/pat.5201.
  19. Kiani, M. S., Mitchell, G.R., “The role of the counter-ion in the preparation of polypyrrole films with enhanced properties using a pulsed electrochemical potential”, Met., 48 (1992) 203–218. https://doi.org/10.1016/0379-6779(92)90062-N.
  20. Namsheer K., Rout, C. S., “Conducting polymers: a comprehensive review on recent advances in synthesis, properties and applications”, RSC Adv., 11 (2021) 5659–5697. https://doi.org/10.1039/D0RA07800J.
  21. Chen, Y., Zhao, Z., Zhang, C., “Structural and electrochemical study of polypyrrole/ZnO nanocomposites coating on nickel sheet synthesized by electrochemical method”, Met., 163 (2013) 51–56. https://doi.org/10.1016/j.synthmet.2012.12.013.
  22. Khodair, Z. T., Ibrahim, N. M., Kadhim, T. J., Mohammad, A. M., “Synthesis and characterization of nickel oxide (NiO) nanoparticles using an environmentally friendly method, and their biomedical applications”, Phys. Lett., 797 (2022) 139564. https://doi.org/10.1016/j.cplett.2022.139564.
  23. Inamdar, H. K., Ambikaprasad, M. V. N., Sasikal, M., “Synthesis and characterization of polypyrrole/NiO doped Nanocomposites (NCs) for Dielectric studies”, Materials Today: Proceedings, 5 (2018) 22652-22656. http://dx.doi.org/10.1016/j.matpr.2018.06.640.
  24. Inamdar, H. K., Sridhar, B. C., Sasikal, M., Ambika Prasad, M. V. N., “Structural and Optical Properties of Polypyrrole/NiO Doped Nanocomposites”, Journal of Nanoscience and Technology, 4 (2018) 400–401. https://doi.org/10.30799/jnst.112.18040308.
  25. Mao, Y., Kong, Q., Guo, B., Shen, L., Wang, Z., Chen, L., “Polypyrrole–NiO composite as high-performance lithium storage material”, Acta, 105 (2013) 162–169. https://doi.org/10.1016/j.electacta.2013.04.086.
  26. Vijeth, H., Kumar, S. P. A., Yesappa, L., Niranjana, M., Vandana, M., Devendrappa, H., “Influence of nickel oxide nanoparticle on the structural, electrical and dielectric properties of polypyrrole nanocomposite”, in: AIP Conference Proceedings. AIP Publishing, (2019) 150029. https://doi.org/10.1063/1.5122578.
  27. Murugavel, S., Malathi, M., “Structural, photoconductivity, and dielectric studies of polythiophene-tin oxide nanocomposites”, Res. Bull., 81 (2016) 93–100. https://doi.org/10.1016/j.materresbull.2016.05.004.
  28. Yadav, H. M., Ramesh, S., Kumar, K. A., Shinde, S., Sandhu, S., Sivasamy, A., Shrestha, N.K., Kim, H. S., Kim, H. -S., Bathula, C., “Impact of polypyrrole incorporation on nickel oxide@multi walled carbon nanotube composite for application in supercapacitors”, Test., 89 (2020) 106727. https://doi.org/10.1016/j.polymertesting.2020.106727.
  29. Ji, W., Ji, J., Cui, X., Chen, J., Liu, D., Deng, H., Fu, Q., “Polypyrrole encapsulation on flower-like porous NiO for advanced high-performance supercapacitors”, Chemical Communications, 51 (2015) 7669–7672. https://doi.org/10.1039/c5cc00965k.
  30. Deepa, M., Sharma, R., Basu, A., Agnihotry, S. A., “Effect of oxalic acid dihydrate on optical and electrochemical properties of sol–gel derived amorphous electrochromic WO3 films”, Acta, 50 (2005) 3545–3555. https://doi.org/10.1016/j.electacta.2005.01.008.
  31. Cheng, W., Baudrin, E., Dunn, B., Zink, J. I., “Synthesis and electrochromic properties of mesoporous tungsten oxide”, Mater. Chem., 11 (2001) 92–97. https://doi.org/10.1039/b003192p.
  32. Hariharan, V., Gnanavel, B., Sathiyapriya, R., Aroulmoji, V., “A Review on Tungsten Oxide (WO3) and their Derivatives for Sensor Applications”, International Journal of Advanced Science and Engineering, 5 (2019) 1163–1168. https://doi.org/10.29294/IJASE.5.4.2019.1163-1168.
  33. Albaris, H., Karuppasamy, G., “Investigation of NH3 gas sensing behavior of intercalated PPy–GO–WO3 hybrid nanocomposite at room temperature”, Materials Science and Engineering: B, 257 (2020). https://doi.org/10.1016/j.mseb.2020.114558.
  34. Navale, S. T., Mane, A. T., Chougule, M. A., Sakhare, R. D., Nalage, S. R., Patil, V. B., “Highly selective and sensitive room temperature NO2 gas sensor based on polypyrrole thin films”, Met., 189 (2014) 94–99. https://doi.org/10.1016/j.synthmet.2014.01.002.
  35. Mane, A. T., Navale, S. T., Sen, S., Aswal, D. K., Gupta, S. K., Patil, V. B., “Nitrogen dioxide (NO2) sensing performance of p-polypyrrole/n-tungsten oxide hybrid nanocomposites at room temperature”, Electron., 16 (2015) 195–204. https://doi.org/10.1016/j.orgel.2014.10.045.
  36. Hung, T. T., Chung, M. H., Chiu, J. J., Yang, M. W., Tien, T. N., Shen, C. Y., “Poly (4-styrenesulfonic acid) doped polypyrrole/tungsten oxide/reduced graphene oxide nanocomposite films based surface acoustic wave sensors for NO sensing behavior”, Electron., 88 (2021). https://doi.org/10.1016/j.orgel.2020.106006.
  37. Su, P. -G., Peng, Y. -T., “Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization”, Actuators B Chem., 193 (2014) 637–643. https://doi.org/10.1016/j.snb.2013.12.027.
  38. Özgür, Ü., Alivov, Ya. I., Liu, C., Teke, A., Reshchikov, M. A., Doğan, S., Avrutin, V., Cho, S. -J., Morkoç, H., “A comprehensive review of ZnO materials and devices”, Appl. Phys., 98 (2005). https://doi.org/10.1063/1.1992666.
  39. Geng, L., Zhao, Y., Huang, X., Wang, S., Zhang, S., Huang, W., Wu, S., “The preparation and gas sensitivity study of polypyrrole/zinc oxide”, Met., 156 (2006) 1078–1082. https://doi.org/10.1016/j.synthmet.2006.06.019.
  40. Fatima, T., Sankarappa, T., Ramanna, R., “DC Conductivity Studies of PPy/ZnO Composites”, Research Journal of Material Sciences, 3 (2015) 1-5. www.isca.in.
  41. Jlassi, K., Sliem, M. H., Benslimane, F. M., Eltai, N. O., Abdullah, A. M., “Design of hybrid clay/ polypyrrole decorated with silver and zinc oxide nanoparticles for anticorrosive and antibacterial applications”, Org. Coat., 149 (2020) 105918. https://doi.org/10.1016/j.porgcoat.2020.105918.
  42. Li, Y., Jiao, M., Yang, M., “In-situ grown nanostructured ZnO via a green approach and gas sensing properties of polypyrrole/ZnO nanohybrids”, Actuators B Chem., 238 (2017) 596–604. https://doi.org/10.1016/j.snb.2016.07.089.
  43. Jain, S., Karmakar, N., Shah, A., Kothari, D. C., Mishra, S., Shimpi, N. G., “Ammonia detection of 1-D ZnO/polypyrrole nanocomposite: Effect of CSA doping and their structural, chemical, thermal and gas sensing behavior”, Surf. Sci., 396 (2017) 1317–1325. https://doi.org/10.1016/j.apsusc.2016.11.154.
  44. Qin, Y., Zhang, T., Cui, Z., “Core-shell structure of polypyrrole grown on W18O49 nanorods for high performance gas sensor operating at room temperature”, Electron., 48 (2017) 254–261. https://doi.org/10.1016/j.orgel.2017.06.014.
  45. Song, P., Wang, Q., Yang, Z., “Ammonia gas sensor based on PPy/ZnSnO3 nanocomposites”, Lett., 65 (2011) 430–432. https://doi.org/10.1016/j.matlet.2010.10.087.
  46. Barkade, S. S., Pinjari, D. V., Singh, A. K., Gogate, P.R., Naik, J. B., Sonawane, S. H., Ashokkumar, M., Pandit, A. B., “Ultrasound Assisted Miniemulsion Polymerization for Preparation of Polypyrrole–Zinc Oxide (PPy/ZnO) Functional Latex for Liquefied Petroleum Gas Sensing”, Eng. Chem. Res., 52 (2013) 7704–7712. https://doi.org/10.1021/ie301698g.
  47. Li, Y., Ban, H., Yang, M., “Highly sensitive NH3 gas sensors based on novel polypyrrole-coated SnO2 nanosheet nanocomposites”, Actuators B Chem., 224 (2016) 449–457. https://doi.org/10.1016/j.snb.2015.10.078.
  48. Beniwal, A., Sunny, “Electrospun SnO2/PPy nanocomposite for ultra-low ammonia concentration detection at room temperature”, Actuators B Chem., 296 (2019) 126660. https://doi.org/10.1016/j.snb.2019.126660.
  49. Mude, B. M., Raulkar, K. B., “Study of CO2 gas detection by multilayer SnO2-ZnO-PPy sensor,” Vidyabharati International Interdisciplinary Research Journal, 12 (2017) 143–148.
  50. Duong, H.N., Nguyen, T. -P., Nguyen, T. T., “Effect of TiO2 anatase nanocrystallite on electrical properties of PPy/TiO2 nanocomposite”, Communications in Physics, 28 (2018) 87. https://doi.org/10.15625/0868-3166/28/1/11036.
  51. Tai, H., Jiang, Y., Xie, G., Yu, J., Zhao, M., “Self-assembly of TiO2 /polypyrrole nanocomposite ultrathin films and application for an NH3 gas sensor”, J. Environ. Anal. Chem., 87 (2007) 539–551. https://doi.org/10.1080/03067310701272954.
  52. Zou, Y., Wang, Q., Jiang, D., Xiang, C., Chu, H., Qiu, S., Zhang, H., Xu, F., Sun, L., Liu, S., “Pd-doped TiO2@polypyrrole core-shell composites as hydrogen-sensing materials”, Int., 42 (2016) 8257–8262. https://doi.org/10.1016/j.ceramint.2016.02.038.
  53. Nandi, D., Ghosh, A. K., Gupta, K., De, A., Sen, P., Duttachowdhury, A., Ghosh, U. C., “Polypyrrole-titanium (IV) doped iron (III) oxide nanocomposites: Synthesis, characterization with tunable electrical and electrochemical properties”, Res. Bull., 47 (2012) 2095–2103. https://doi.org/10.1016/j.materresbull.2012.03.040.
  54. Gao, Y., Ding, K., Xu, X., Wang, Y., Yu, D., “PPy film/TiO2 nanotubes composite with enhanced supercapacitive properties”, RSC Adv., 4 (2014) 27130–27134. https://doi.org/10.1039/C4RA03014A.
  55. Gao, Y., Wang, Y., Xu, X., Ding, K., Yu, D., “Synthesis of polypyrrole–titanium dioxide brush-like nanocomposites with enhanced supercapacitive performance”, RSC Adv., 4 (2014) 63719–63724. https://doi.org/10.1039/C4RA10680F.
  56. Birgisson, S., Saha, D., Iversen, B. B., “Formation Mechanisms of Nanocrystalline MnO2 Polymorphs under Hydrothermal Conditions”, Growth Des., 18 (2018) 827–838. https://doi.org/10.1021/acs.cgd.7b01304.
  57. Ji, J., Zhang, X., Liu, J., Peng, L., Chen, C., Huang, Z., Li, L., Yu, X., Shang, S., “Assembly of polypyrrole nanotube@MnO2 composites with an improved electrochemical capacitance”, Materials Science and Engineering: B, 198 (2015) 51–56. https://doi.org/10.1016/j.mseb.2015.04.004.
  58. Šešelj, N., Karakterizacija pseudokapacitivnih svojstava kemijski priređenog MnO2 te kompozita MnO2/polipirol, Kemija u Industriji, 65 (2016) 127–136. https://doi.org/10.15255/KUI.2015.009.
  59. Sharma, R. K., Rastogi, A. C., Desu, S. B., “Manganese oxide embedded polypyrrole nanocomposites for electrochemical supercapacitor”, Acta, 53 (2008) 7690–7695. https://doi.org/10.1016/j.electacta.2008.04.028.
  60. Malook, K., Khan, H., Shah, M., Haque, I., “Highly selective and sensitive response of Polypyrrole–MnO2 based composites towards ammonia gas”, Compos., 40 (2019) 1676–1683. https://doi.org/10.1002/pc.24917.
  61. Zang, J., Bao, S. -J., Li, C. M., Bian, H., Cui, X., Bao, Q., Sun, C. Q., Guo, J., Lian, K., “Well-Aligned Cone-Shaped Nanostructure of Polypyrrole/RuO2 and Its Electrochemical Supercapacitor”, The Journal of Physical Chemistry C, 112 (2008) 14843–14847. https://doi.org/10.1021/jp8049558.
  62. Wang, X., Wang, T., Liu, D., Guo, J., Liu, P., “Synthesis and Electrochemical Performance of CeO2/PPy Nanocomposites: Interfacial Effect”, Eng. Chem. Res., 55 (2016) 866–874. https://doi.org/10.1021/acs.iecr.5b03891.
  63. Tang, P. -Y., Han, L. -J., Genç, A., He, Y. -M., Zhang, X., Zhang, L., Galán-Mascarós, J. R., Morante, J. R., Arbiol, J., “Synergistic effects in 3D honeycomb-like hematite nanoflakes/branched polypyrrole nanoleaves heterostructures as high-performance negative electrodes for asymmetric supercapacitors”, Nano Energy, 22 (2016) 189–201. https://doi.org/10.1016/j.nanoen.2016.02.019.
  64. Wang, F., Liu, Z., Wang, X., Yuan, X., Wu, X., Zhu, Y., Fu, L., Wu, Y., “A conductive polymer coated MoO3 anode enables an Al-ion capacitor with high performance”, Mater. Chem. A Mater., 4 (2016) 5115–5123. https://doi.org/10.1039/C6TA01398H.
  65. Choudhary, A. R., Waghuley, S. A., “LPG sensing application of PPy based nanocomposites at low operable temperature”, Lett., 205 (2017) 36–39. https://doi.org/10.1016/j.matlet.2017.06.053.
  66. Thomas, M. E., Tropf, W. J., Handbook of Optical Constants of Solids, Elsevier Science, 1998.
  67. Irfan, M., Shakoor, A., “Structural, Electrical and Dielectric Properties of Dodecylbenzene Sulphonic Acid Doped Polypyrrole/Nano-Y2O3 Composites”, Inorg. Organomet. Polym. Mater., 30 (2020) 1287–1292. https://doi.org/10.1007/s10904-019-01287-w.
  68. Yan, Y., Yang, G., Xu, J. -L., Zhang, M., Kuo, C. -C., Wang, S. -D., “Conducting polymer-inorganic nanocomposite-based gas sensors: a review”, Technol. Adv. Mater., 21 (2020) 768–786. https://doi.org/10.1080/14686996.2020.1820845.
  69. Bajantri, S. N., Mathad, R. D., “Effect of Energy Band Gap and Substrate Temperature on Gas Sensing Properties of F and PEG-6000 Co-Doped SnO2 Thin Films”, International Journal of Pure and Applied Physics, 13 (2017), 219-229.
  70. Sekhar, M. C., Ramana, M. V., “Instant Synthesis of ZnO Nanoparticles by Microwave hydrothermal Method”, J. Nanosci. Nanotechnol., 8 (2017) 174-23.
  71. Fatima, A. A., Devadason, S., “Influence of Multilayers on Structural, Morphological, Luminescence and Magnetic Properties of ZnO Think Films”, J. Nanosci. Nanotechnol., 3 (2011) 249-258.
International Journal of Nanoscience and Nanotechnology
Volume 20, Issue 2
2024
Pages 143-159