International Journal of Nanoscience and Nanotechnology

International Journal of Nanoscience and Nanotechnology

The Controllable Growth of CoNiCu Nanoalloy Electrodeposited from Electrolyte-Containing Alkyl Polyglucoside

Document Type : Research Paper

Author
Setia Budi
Department of Chemistry, Faculty of Mathematics and Sciences, Universitas Negeri Jakarta, Jl. Rawamangun Muka, Jakarta Timur 13220, Indonesia
10.22034/ijnn.2024.1999452.2358
Abstract
   A controlled growth characteristic of CoNiCu nanoalloys on indium tin oxide coated glass (ITO) has been prepared by alkyl polyglucoside (APG) assisted electrodeposition. The FESEM analysis carried out on the as-prepared samples found that the morphology of nanoscale Co-Ni-Cu alloy particles was strongly influenced by the APG surfactant in the reaction. In a typical process, the morphology of Co-Ni-Cu particles was spherical with excellent size distribution of average size ca. 50 nm. It is in total contrast with those prepared in the absence of APG, of which is irregular shape particles of size ca. 100 nm as the dominant product. The composition analysis on the deposits found that the addition of the APG surfactant in the reaction may modify the ratio of the alloys to some extents, as the change in the co-electrodeposition potential become improbable in the system without the APG surfactant.
Keywords
Nanoalloys
CoNiCu
Electrodeposition
Alkyl polyglucoside

Subjects

  1. Wang, C., Li, W., Lu, X., Xie, S., Xiao, F., Liu, P., Tong, Y., "Facile synthesis of porous 3D CoNiCu nano-network structure and their activity towards hydrogen evolution reaction", J. Hydrogen Energy, 37 (2012) 18688–18693. https://doi.org/10.1016/j.ijhydene.2012.09.149.
  2. Gong, Y., Gu, F., Zhang, Z., Liu, Y., Li, G., Chen, B., Wang, X., "High-performance non-enzymatic glucose sensors based on CoNiCu alloy nanotubes arrays prepared by electrodeposition", Mater., 6 (2019) 1–9. https://doi.org/10.3389/fmats.2019.00003.
  3. Cooper, K. N., Vyas, N. J., Steinke, D. M., Love, C. J., Kinane, C. H. W., Barnes, J. F. K., "Neutron reflectivity of electrodeposited thin magnetic films", Act,. 138 (2014) 56–61. https://doi.org/10.1016/j.electacta.2014.06.086.
  4. Takata, P. T. A., Sumodjo, F. M., "Electrodeposition of magnetic CoPd thin films: Influence of plating condition", Acta, 52 (2007) 6089 – 6096. https://doi.org/10.1016/j.electacta.2007.03.048.
  5. Andricacos, N., Robertson, P. C., "Future directions in electroplated materials for thin-film recording heads", IBM J. Res. Dev., 42 (1998) 671–680. https://doi.org/10.1147/rd.425.0671.
  6. Kim, D., Park, B. Y., Yoo, P. T. A., Sumodjo, N. V., Myung, D., "Magnetic properties of nanocrystalline iron group thin film alloys electrodeposited from sulfate and chloride baths", Acta, 48 (2003) 819–830.
  7. Peiravi, M. M., Ashabi, A., "Magneto Effects on Fe3O4 Nanoparticles through the Triangular and Rectangular Baffles on Thread Stretching Surface for Rotary Seals in Computer Hardware", Int. J. Nanosci. Nanotechnol., 18 (2022) 143–156.
  8. Gómez, S., Pané, E., Vallés, E., "Electrodeposition of Co-Ni and Co-Ni-Cu systems in sulphate-citrate medium", Acta, 51 (2005) 146–153. https://doi.org/10.1016/j.electacta.2005.04.010.
  9. Esfandiarpour, M. N., Nasrabadi, E., "Vacancy formation energy in CuNiCo equimolar alloy and CuNiCoFe high entropy alloy: ab initio based study", Calphad Comput. Coupling Phase Diagrams Thermochem, 66 (2019) 101634. https://doi.org/10.1016/j.calphad.2019.101634.
  10. Wen, Q. Y., Liu, Y. F., Wang, Y. Z., Zhu, Q. S., Wu, M., "Positive microemulsion synthesis and magnetic property of amorphous multicomponent Co-, Ni- and Cu-based alloy nanoparticles", Colloids Surfaces A Physicochem. Eng. Asp, 318 (2008) 238–244. https://doi.org/10.1016/j.colsurfa.2007.12.041.
  11. Mulyadi Afrizal, M., "The Effects of Deposition Time on Phase and Structure of FeCoNi Films", Mater, 1 (2022) 40–44. https://doi.org/10.56425/cma.v1i2.23.
  12. Turmiasaputri, A. I. N., Handoko, E., Budi, S., "The Effect of Temperature and pH on FeCoNi Film Electrodeposition", Mater., 1 (2022) 61–65. https://doi.org/10.56425/cma.v1i2.25.
  13. Zhanbo, Z., Yaomin, L., Xiaoyuan, S., Xiaoping, S., "Compositions, magnetic properties and GMR performances of melt-spun Cu-Co-Ni ribbons", Magn. Magn. Mater., 269 (2004) 341–345. https://doi.org/10.1016/S0304-8853(03)00629-2.
  14. Singh, B., Katariya, N., Ganesan, V., Shrivastava, S. B., "Synthesis and structural studies of nickel doped cobalt ferrite thin films", J. Nanosci. Nanotechnol., 16 (2020) 67–72.
  15. Li, L., Meng, Z., Yuan, X., Zhang, A., "Research on microstructures and properties of CoNiCr and CoNiCu medium-entropy alloys", Phys. Conf. Ser., 2044 (2021). https://doi.org/10.1088/1742-6596/2044/1/012063.
  16. El-Deab, M. S., "On the preferential crystallographic orientation of Au nanoparticles: Effect of electrodeposition time", Acta, 54 (2009) 3720–3725. https://doi.org/10.1016/ j.electacta.2009.01.054.
  17. Murakami, Y., Maeda, A., Kitada, K., Murase, K., Fukami, Y., "Electrodeposition of a CoNiCu medium-entropy alloy in a water-in-oil emulsion", Commun., 128 (2021) 107057. https://doi.org/10.1016/j.elecom.2021.107057.
  18. Budi, S., Tawwabin, R. A., Cahyana, U., Paristiowati, M., "Saccharin-assisted Galvanostatic Electrodeposition of Nanocrystalline FeCo Films on a Flexible Substrate", J. Electrochem. Sci., 15 (2020) 6682–6694. https://doi.org/10.20964/2020.07.74.
  19. Budi, S., Muhab, S., Purwanto, A., Kurniawan, B., Manaf, A., "Effect of the electrodeposition potential on the magnetic properties of FeCoNi films", Sci. Pol., 37 (2019) 389–394. https://doi.org/10.2478/msp-2019-0044.
  20. Sabella, A., Reyhan Syifa, N. A., "The Effect of Deposition Potential on the Electrodeposition of Platinum Nanoparticles for Ethanol Electrooxidation", Mater., 1 (2022) 88–92. https://doi.org/10.56425/ cma.v1i3.46.
  21. Wang, M., Hu, Q., Wang, L., Li, Z., "Efficient and sustainable photocatalytic degradation of dye in wastewater with porous and recyclable wood foam@V2O5 photocatalysts", Clean. Prod., 332 (2022) 130054. https://doi.org/10.1016/J.JCLEPRO.2021.130054.
  22. Ahmadi, R., Razzaghian, A., Eivazi, Z., Shahidi, K., "Synthesis of Cu-CuO and Cu-Cu2O Nanoparticles via Electro-Explosion of Wire Method", J. Nanosci. Nanotechnol., 14 (2018) 93–99.
  23. Onabuta, Y., Kunimoto, M., Ono, F., Fukunaka, Y., Nakai, H., Zangari, G., Homma, T., "Analysis of the behavior of Zn atoms with a Pb additive on the surface during Zn electrodeposition", Commun., 138 (2022) 107291. https://doi.org/10.1016/j.elecom.2022.107291.
  24. Budi, S., Daud, A. R., Radiman, S., Umar, A. A., "Effective electrodeposition of Co-Ni-Cu alloys nanoparticles in the presence of alkyl polyglucoside surfactant", Surf. Sci., 257 (2010) 1027–1033. https://doi.org/10.1016/j.apsusc.2010.07.103.
  25. Imanian Ghazanlou, A. H. S., Farhood, S., Hosouli, S., Ahmadiyeh, A., Rasooli, S., "Pulse and direct electrodeposition of Ni–Co/micro and nanosized SiO2 particles", (2018). https://doi.org/10.1080/ 10426914.2017.1364748.
  26. Siddig, S., Radiman, S. V., Muniandy, L. S., Jan, M. A., "Structure of cubic phases in ternary systems Glucopone/water/hydrocarbon", Colloids Surfaces A Physicochem. Eng. Asp., 236 (2004) 57–67. https://doi.org/10.1016/j.colsurfa.2004.01.023.
  27. Vakh, S., Kasper, Y., Kovalchuk, E., Safonova, A., Bulatov, C., "Alkyl polyglucoside-based supramolecular solvent formation in liquid-phase microextraction", Chim. Acta, 1228 (2022) 340304. https://doi.org/10.1016/j.aca.2022.340304.
  28. Ilic, M., Cvetkovic, M., Tasic-Kostov, D., "Emulsions with alkyl polyglucosides as carriers for off-label topical spironolactone–safety and stability evaluation", Dev. Technol., 26 (2021) 373–379. https://doi.org/10.1080/10837450.2021.1874011.
  29. Trejo, H., Ruiz, R. O., Borges, Y., Meas, G., "Influence of polyethoxylated additives on zinc electrodeposition from acidic solutions", Appl. Electrochem, 31 (2001) 685–692. https://doi.org/10.1023/A:1017580025961.
  30. Alvarez, D. R., Salinas, A. E., "Nucleation and growth of Zn on HOPG in the presence of gelatine as additive", Electroanal. Chem., 566 (2004) 393–400. https://doi.org/10.1016/j.jelechem.2003.11.051.
  31. Pané, E., Gómez, J., Garcia-Amorós, D., Velasco, E., Vallés, S., "Modulation of the magnetic properties of CoNi coatings by electrodeposition in the presence of a redox cationic surfactant", Surf. Sci., 253 (2006) 2964–2968. https://doi.org/10.1016/j.apsusc.2006.06.040.
  32. Rusling, J. F., "Molecular aspects of electron transfer at electrodes in micellar solutions", Colloids Surfaces A Physicochem. Eng. Asp., 123 (1997) 81–88. https://doi.org/10.1016/S0927-7757(96)03789-2.
  33. Manne, S., Cleveland, H. E., Gaub, G. D., Stucky, P. K., Hansma, J. P., "Direct Visualization of Surfactant Hemimicelles by Force Microscopy of the Electrical Double Layer", Langmuir, 10 (1994) 4409–4413. https://doi.org/10.1021/la00024a003.
  34. Joseph, G. J., Phatak, S., "Effect of surfactant on the bath stability and electrodeposition of Sn-Ag-Cu films", Coatings Technol., 202 (2008) 3023–3028. https://doi.org/10.1016/j.surfcoat.2007.11.002.
  35. Wang, D., Wang, H., Wang, C., Xu, Q., "Influence of alkyl polyglucoside and fatty alcohol ether sulfate on the foaming and wetting properties of sodium dodecyl benzene sulfonate for mine dust control", Powder Technol., 345 (2019) 91–98. https://doi.org/10.1016/j.powtec.2018.12.084.
  36. Söǧüt, C., Dönük, G., Apaydin, O. F., Bakkaloǧlu, O., "Examination of CoNiCu thin films by using XRF and XRD", J. Phys., 92 (2014) 435–439. https://doi.org/10.1139/cjp-2012-0538.
  37. Mondal, A., Basumallick, P. P., Chattopadhyay, B. N., "Magnetic behavior of nanocrystalline Cu-Ni-Co alloys prepared by mechanical alloying and isothermal annealing", Alloys Compd., 457 (2008) 10–14. https://doi.org/10.1016/j.jallcom.2007.02.139.
  38. Castaño, J. B., de Campos, I. G., Solórzano-Naranjo, E., de A. Brocchi, E. P. M., "Characterization of ternary cunico metallic nanoparticles produced by hydrogen reduction", Materials (Basel) 14 (2021) 1–13. https://doi.org/10.3390/ma14206006.
International Journal of Nanoscience and Nanotechnology
Volume 20, Issue 2
2024
Pages 103-111