International Journal of Nanoscience and Nanotechnology

International Journal of Nanoscience and Nanotechnology

Polyaniline/Fe3O4/Poly (Methyl Methacrylate) Nanocomposites as an Acrylic Resin Coating for Enhancement of Anticorrosion Properties of Alkyd Paints

Document Type : Research Paper

Authors
H. Ghafouri Taleghani 1
M. Soleimani-Lashkenari 2
Sh. Fazli 3
M. Ghorbani 4
1 Department of Chemical Engineering, University of Mazandarn, Babolsar, Iran
2 Fuel Cell Electrochemistry and Advanced Material Research Laboratory, Faculty of Engineering Modern Technologies, Amol University of Special Modern Technologies, Amol, Iran
3 Department of Chemical Engineering, Mazandaran University of Science & Technology, Babol, Iran
4 Department of Chemical Engineering, Babol Noshirvani University of Technolgy, Babol, Iran
Abstract
   The exceptional application of nanocomposites containing polyaniline as a conductive polymer, poly (methyl methacrylate) (PMMA) as an acrylic resin and Fe3O4 nanoparticles, for corrosion protection of mild steel was reported. The synthesized nanocomposites, were characterized with different techniques. The resulting PMMA/Polyaniline/Fe3O4 nanocomposites were mixed with industrial alkyd paint to be employed as an anti-corrosion layer for mild steel in a NaCl solution. Accordingly, the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were applied in order to investigate the corrosion behavior of the coated mild steel. Based on the results, the nanocomposites showed outstanding anti-corrosion properties compared with other composites coating. After investigating various compositions of the nanocomposites (3, 6, 9 and 12%) in the alkyd paint, the ideal composition related to the most favorable corrosion protection was obtained for the paint mixture comprising 6% nanocomposites.
Keywords
Polyaniline
Fe3O4 nanoparticles
PMMA
Anti-corrosion
Electrochemical impedance

Subjects

  1. Mohammadzadeh, A., Taleghani, H. G., Lashkenari, M. S., "Preparation and comparative study of anticorrosion nanocomposites of polyaniline/graphene oxide/clay coating", J. Mater. Res. Technol., 13 (2021) 2325-2335.
  2. Lin, Y., Singh, A., Ebenso, E. E., Wu, Y., Zhu, C., Zhu, H., "Effect of poly (methyl methacrylate-co-N-vinyl-2-pyrrolidone) polymer on J55 steel corrosion in 3.5% NaCl solution saturated with CO 2", J. Taiwan Inst. Chem. Eng., 46 (2015) 214-222.
  3. Layeghi, R., Farbodi, M., Ghalebsaz-Jeddi, N., "Preparation of polyaniline-polystyrene-ZnO nanocomposite and characterization of its anti-corrosive performance", Int. J. Nanosci. Nanotechnol., 12 (2016) 167-174.
  4. Bilal, S., Gul, H., Gul, S., "One Pot Synthesis of Highly Thermally Stable Poly (2-Methylaniline) for Corrosion Protection of Stainless Steel", Iran. J. Sci. Technol. Trans A. Sci., 42 (2018) 1915-1922.
  5. Shah, A.-u.-H. A., Kamran, M., Bilal, S., Ullah, R., "Cost effective chemical oxidative synthesis of soluble and electroactive polyaniline salt and its application as anticorrosive agent for steel", Materials, 12 (2019) 1527.
  6. Yeganeh, M., Marashi, S., Mohammadi, N., "Smart corrosion inhibition of mild steel using mesoporous silica nanocontainers loaded with molybdate", Int. J. Nanosci. Nanotechnol., 14 (2018) 143-151.
  7. Qiu, S., Chen, C., Zheng, W., Li, W., Zhao, H., Wang, L., "Long-term corrosion protection of mild steel by epoxy coating containing self-doped polyaniline nanofiber", Synth. Met., 229 (2017) 39-46.
  8. Jafari, Y., Ghoreishi, S., Shabani-Nooshabadi, M., "Polyaniline/graphene nanocomposite coatings on copper: electropolymerization, characterization, and evaluation of corrosion protection performance", Synth. Met., 217 (2016) 220-230.
  9. Hosseini, M., Shahryari, E., Najjar, R., Ahadzadeh, I., "Study of super capacitive behavior of polyaniline/manganese oxide-carbon black nanocomposites based electrodes", Int. J. Nanosci. Nanotechnol., 11 (2015) 147-157.
  10. Ray, S., Easteal, A. J., Cooney, R. P., Edmonds, N. R., "Structure and properties of melt-processed PVDF/PMMA/polyaniline blends", Mater. Chem. Phys., 113 (2009) 829-838.
  11. Rahman, S. U., Bilal, S., "Synthesis and Characterization of Polyaniline-Chitosan Patches with Enhanced Stability in Physiological Conditions", Polymers, 12 (2020) 2870.
  12. Lu, H., Hu, Y., Gu, M., Tang, S., Lu, H., Meng, X., "Synthesis and characterization of silica–acrylic–epoxy hybrid coatings on 430 stainless steel", Surf. Coat. Technol., 204 (2009) 91-98.
  13. Shi, S., Zhang, Z., Yu, L., "Hydrophobic polyaniline/modified SiO 2 coatings for anticorrosion protection", Synth. Met., 233 (2017) 94-100.
  14. Javidparvar, A., Ramezanzadeh, B., Ghasemi, E., "The effect of surface morphology and treatment of Fe3O4 nanoparticles on the corrosion resistance of epoxy coating", J. Taiwan Inst. Chem. Eng., 61 (2016) 356-366.
  15. Mammeri, F., Rozes, L., Sanchez, C., Bourhis, E. L., "Mechanical properties of SiO 2-PMMA based hybrid organic-inorganic thin films", J. Sol-Gel Sci. Technol., 26 (2003) 413-417.
  16. Alirezaei, S., Monirvaghefi, S., Salehi, M., Saatchi, A., "Wear behavior of Ni–P and Ni–P–Al 2 O 3 electroless coatings", Wear, 262 (2007) 978-985.
  17. Afroukhteh, S., Dehghanian, C., Emamy, M., "Corrosion behavior of Ni–P/nano-TiC composite coating prepared in electroless baths containing different types of surfactant", Progress in Natural Science: Materials International, 22 (2012) 480-487.
  18. Ramezanzadeh, B., Moghadam, M. M., Shohani, N., Mahdavian, M., "Effects of highly crystalline and conductive polyaniline/graphene oxide composites on the corrosion protection performance of a zinc-rich epoxy coating", Chem. Eng. J., 320 (2017) 363-375.
  19. Rahmanzadeh, L., Ghorbani, M., Jahanshahi, M., "Synthesis and Characterization of Fe3O4@ Polyrhodanine Nanocomposite with Core–Shell Morphology", Adv. Polym. Tech., 33 (2014).
  20. Muhammad, A., Bilal, S., "Comparative study of the adsorption of Acid Blue 40 on polyaniline, magnetic oxide and their composites: Synthesis, characterization and application", Materials, 12 (2019) 2854.
  21. Aleahmad, M., Taleghani, H. G., Eisazadeh, H., "Preparation and characterization of PAn/NiO nanocomposite using various surfactants", Synth. Met., 161 (2011) 990-995.
  22. Bilal, S., Gul, S., Holze, R., "An impressive emulsion polymerization route for the synthesis of highly soluble and conducting polyaniline salts", Synth. Met., 206 (2015) 131-144.
  23. Ur Rahman, S., Röse, P., Krewer, U., Bilal, S., Farooq, S., "Exploring the Functional Properties of Sodium Phytate Doped Polyaniline Nanofibers Modified FTO Electrodes for High-Performance Binder Free Symmetric Supercapacitors", Polymers, 13 (2021) 2329.
  24. Sharma, B. K., Gupta, A. K., Khare, N., Dhawan, S., Gupta, H., "Synthesis and characterization of polyaniline–ZnO composite and its dielectric behavior", Synth. Met., 159 (2009) 391-395.
  25. Muhammad, A., Shah, A.-u.-H. A., Bilal, S., Rahman, G., "Basic Blue dye adsorption from water using Polyaniline/Magnetite (Fe3O4) composites: Kinetic and thermodynamic aspects", Materials, 12 (2019) 1764.
  26. Cao, Z., Jiang, W., Ye, X., Gong, X., "Preparation of superparamagnetic Fe 3 O 4/PMMA nano composites and their magnetorheological characteristics", J. Magn. Magn. Mater., 320 (2008) 1499-1502.
  27. Hong, R., Feng, B., Cai, X., Liu, G., Li, H., Ding, J., Zheng, Y., Wei, D., "Double‐miniemulsion preparation of Fe3O4/poly (methyl methacrylate) magnetic latex", J. Appl. Polym. Sci., 112 (2009) 89-98.
  28. Röse, P., Krewer, U., Bilal, S., "An Amazingly Simple, Fast and Green Synthesis Route to Polyaniline Nanofibers for Efficient Energy Storage", Polymers, 12 (2020) 2212.
  29. Ferriol, M., Gentilhomme, A., Cochez, M., Oget, N., Mieloszynski, J., "Thermal degradation of poly (methyl methacrylate)(PMMA): modelling of DTG and TG curves", Polym. Degradation Stab., 79 (2003) 271-281.
  30. Bilal, S., Farooq, S., Holze, R., "Improved solubility, conductivity, thermal stability and corrosion protection properties of poly (o-toluidine) synthesized via chemical polymerization", Synth. Met., 197 (2014) 144-153.
  31. Shen, S., Guo, X.-y., Li, C.-c., Wen, Y., Yang, H.-F., "The synergistic mechanism of phytic acid monolayers and iodide ions for inhibition of copper corrosion in acidic media", RSC Advances, 4 (2014) 10597-10606.
  32. Shabani-Nooshabadi, M., Ghoreishi, S., Behpour, M., "Direct electrosynthesis of polyaniline–montmorrilonite nanocomposite coatings on aluminum alloy 3004 and their corrosion protection performance", Corros. Sci., 53 (2011) 3035-3042.
  33. Radhakrishnan, S., Siju, C., Mahanta, D., Patil, S., Madras, G., "Conducting polyaniline–nano-TiO2 composites for smart corrosion resistant coatings", Electrochim. Acta, 54 (2009) 1249-1254.
  34. Hu, C., Li, Y., Kong, Y., Ding, Y., "Preparation of poly (o-toluidine)/nano ZnO/epoxy composite coating and evaluation of its corrosion resistance properties", Synth. Met., 214 (2016) 62-70.
  35. Kumar S, A., Bhandari, H., Sharma, C., Khatoon, F., Dhawan, S. K., "A new smart coating of polyaniline–SiO2 composite for protection of mild steel against corrosion in strong acidic medium", Polym. Int., 62 (2013) 1192-1201.
  36. Chang, C.-H., Huang, T.-C., Peng, C.-W., Yeh, T.-C., Lu, H.-I., Hung, W.-I., Weng, C.-J., Yang, T.-I., Yeh, J.-M., "Novel anticorrosion coatings prepared from polyaniline/graphene composites", Carbon, 50 (2012) 5044-5051.
  37. Motlatle, A. M., Ray, S. S., Scriba, M., "Polyaniline-clay composite-containing epoxy coating with enhanced corrosion protection and mechanical properties", Synth. Met., 245 (2018) 102-110.
  38. Sumi, V., Arunima, S., Deepa, M., Sha, M. A., Riyas, A., Meera, M., Saji, V. S., Shibli, S., "PANI-Fe2O3 composite for enhancement of active life of alkyd resin coating for corrosion protection of steel", Mater. Chem. Phys., 247 (2020) 122881.
  39. Sarkar, N., Sahoo, G., Das, R., Prusty, G., Sahu, D., Swain, S. K., "Anticorrosion performance of three-dimensional hierarchical PANI@ BN nanohybrids", Industrial & Engineering Chemistry Research, 55 (2016) 2921-2931.
International Journal of Nanoscience and Nanotechnology
Volume 17, Issue 4
Autumn 2021
Pages 209-220