International Journal of Nanoscience and Nanotechnology

International Journal of Nanoscience and Nanotechnology

Synthesize and Characterization of a Novel ‎Cadmium Selenide‏ ‏Nanoparticle with Iron ‎Precursor Applicable in Hyperthermia of ‎Cancer Cells

Document Type : Research Paper

Authors
N. Jafaripour 1
H. Omidvar 1
S. Saber-Samandari 2
R. Mohammadi 3
R. Shokrani Foroushani 4
B. Kamyab Moghadas 3
M. Soleimani 5
B. Noshadi 6
A. Khandan 2
1 Faculty of Materials Engineering, Amirkabir University of Technology, Tehran, Iran
2 New Technologies Research Center, Amirkabir University of Technology,‎ Tehran, Iran‎
3 Department of Chemical Engineering, Shiraz Branch, Islamic Azad University,‎ Shiraz, Iran
4 Medical Student, School of Medicine, Isfahan University of Medical Sciences, Isfahan, ‎Iran
5 Biomedical Engineering Department, Islamic Azad University Science and Research ‎Branch, Tehran, Iran
6 Faculty of Pharmacy, Department of Pharmaceutical Chemistry, Eastern Mediterranean ‎University, via Mersin 10, TR-99628 Famagusta, North Cyprus, Turkey‎
Abstract
   Many researchers have considered the idea of using heat to shrink cancer cells and treat cancer. However, efforts in recent years have led to creating novel material more practical in clinical application. The main reason for the synthesis and producing these materials is to raise the temperature in the right place so that healthy cells around the cancerous tissue are not harmed. Nowadays, this can be partly achievable with new devices and methods. Also, cadmium selenide (CdSe) nanoparticles with zinc selenide (ZnS) coating for special optical properties were investigated in this work. The CdSe nanoparticles have a wide application in biomedical engineering, including detecting cancer tumors and hyperthermia. There are various methods for synthesizing CdSe nanoparticles, such as precipitation, wet chemistry, mechanical activation, and mechanochemical technique. In this study, we have tried to use an economical method to control Cd ions' toxicity. After fabricating the nanoparticles, vibrating sample magnetometer (VSM), and hyperthermia analyses (HT), X-ray diffraction (XRD), and scanning electron microscopy (SEM) technique were performed to characterize the magnetization, thermal changes versus time, phase, and morphology of the synthesized nanoparticles. The obtained results indicated that the CdSe successfully synthesized using chemical segmentation for biomaterials applications.
Keywords
Quantum dots
Hyperthermia
Radiation therapy
Magnetic nanoparticles
Chemical segmentation.‎

Subjects

  1. Talapin, D. V., Mekis, I., Götzinger, S., Kornowski, A., Benson, O., Weller, H., “CdSe/CdS/ZnS and CdSe/ZnSe/ZnS Core− Shell− Shell Nanocrystals”, The Journal of Physical Chemistry B, 108(49) (2004) 18826-18831.
  2. Chin, P. T., de Mello Donegá, C., van Bavel, S. S., Meskers, S. C., Sommerdijk, N. A., Janssen, R. A., “Highly luminescent CdTe/CdSe colloidal heteronanocrystals with temperature-dependent emission color”, Journal of the American Chemical Society,129(48) (2007) 14880-14886.
  3.  Karbasian, M., Eftekhari, S. A., Karimzadeh Kolamroudi, M., Kamyab Moghadas, B., Nasri, P., Jasemi, A., Khandan, A., “Therapy with new generation of biodegradable and bioconjugate 3D printed artificial gastrointestinal lumen”, Iranian Journal of Basic Medical Sciences, 24(3) (2021) 391-399.
  4. Amiri, G. R., Fatahian, S., Mahmoudi, S., “Preparation and optical properties assessment of CdSe quantum dots”, Materials Sciences and Applications, 4(02) (2013) 134.
  5. Skaptsov, A. A., Goftman, V. V., Galushka, V. V., Markin, A. V., Kochubey, V. I., Goryacheva, I. Y., “Thermosensitivity of nanothermometer: CdSe/ZnS vs. CuInS2/ZnS,” In Saratov Fall Meeting 2015: Third International Symposium on Optics and Biophotonics and Seventh Finnish-Russian Photonics and Laser Symposium (PALS) (Vol. 9917, p. 991712), International Society for Optics and Photonics, (2016, April).
  6. Nguyen, T. L., Michael, M., Mulvaney, P., “Synthesis of highly crystalline CdSe@ ZnO nanocrystals via monolayer-by-monolayer epitaxial shell deposition,” Chemistry of Materials, 26(14) (2014) 4274-4279.
  7. Singh, S., Barick, K. C., Bahadur, D., “Inactivation of bacterial pathogens under magnetic hyperthermia using Fe3O4–ZnO nanocomposite” Powder technology, 269 (2015) 513-519.
  8. Kyutt, R. N., Toropov, A. A., Sorokin, S. V., Shubina, T. V., Ivanov, S. V., Karlsteen, M., Willander, M., “Broadening of submonolayer CdSe sheets in CdSe/ZnSe superlattices studied by x-ray diffraction”, Applied physics letters, 75(3) (1999) 373-375.
  9. Kandan, A., Ozada, N., “Bredigite-Magnetite (Ca7MgSi4O16-Fe3O4) nanoparticles: A study on their magnetic properties”, Journal of Alloys and Compounds, 726 (2017) 729-736.
  10. Shayan, A., Abdellahi, M., Shahmohammadian, F., Jabbarzare, S., Khandan, A., Ghayour, H., “Mechanochemically aided sintering process for the synthesis of barium ferrite: Effect of aluminum substitution on microstructure, magnetic properties and microwave absorption” Journal of Alloys and Compounds,708 (2017) 538-546.
  11. Ghayour, H., Abdellahi, M., Nejad, M. G., Khandan, A., Saber-Samandari, S., “Study of the effect of the Zn 2+ content on the anisotropy and specific absorption rate of the cobalt ferrite: the application of Co 1− x Zn x Fe 2 O 4 ferrite for magnetic hyperthermia” Journal of the Australian Ceramic Society, 54(2) (2018) 223-230.
  12. Jabbarzare, S., Abdellahi, M., Ghayour, H., Arpanahi, A., Khandan, A., “A study on the synthesis and magnetic properties of the cerium ferrite ceramic”, Journal of Alloys and Compounds, 694 (2017) 800-807.
  13. Najafinezhad, A., Abdellahi, M., Saber-Samandari, S., Ghayour, H., Khandan, A., “Hydroxyapatite-M-type strontium hexaferrite: a new composite for hyperthermia applications”, Journal of Alloys and Compounds,734 (2018) 290-300.
  14. Abdellahi, M., Najfinezhad, A., Saber-Samanadari, S., Khandan, A., Ghayour, H., “Zn and Zr co-doped M-type strontium hexaferrite: Synthesis, characterization and hyperthermia application,” Chinese journal of physics, 56(1) (2018) 331-339.
  15. Ghayour, H., Abdellahi, M., Ozada, N., Jabbrzare, S., Khandan, A., “Hyperthermia application of zinc doped nickel ferrite nanoparticles”, Journal of Physics and Chemistry of Solids, 111(2017) 464-472.
  16. Montazeran, A. H., Saber Samandari, S., Khandan, A., “Artificial intelligence investigation of three silicates bioceramics-magnetite bio-nanocomposite: Hyperthermia and biomedical applications”, Nanomedicine Journal, 5(3) (2018) 163-171.
  17. Razavi, M., Khandan, A., “Safety, regulatory issues, long-term biotoxicity, and the processing environment”, In Nanobiomaterials Science, Development and Evaluation (pp. 261-279), Woodhead Publishing (2017).
  18. Joneidi Yekta, H., Shahali, M., Khorshidi, S., Rezaei, S., Montazeran, A. H., Samandari, S. S., Khandan, A., “Mathematically and experimentally defined porous bone scaffold produced for bone substitute application”, Nanomedicine Journal, 5(4)(2018) 227-234.
  19. Sahmani, S., Khandan, A., Saber-Samandari, S., Aghdam, M. M., “Effect of magnetite nanoparticles on the biological and mechanical properties of hydroxyapatite porous scaffolds coated with ibuprofen drug”, Materials Science and Engineering: C, 110835 (2020).
  20. Monshi, M., Esmaeili, S., Kolooshani, A., Moghadas, B. K., Saber-Samandari, S., Khandan, A., “A novel three-dimensional printing of electroconductive scaffolds for bone cancer therapy application”, Nanomedicine Journal, (2020).
  21. Khandan, A., Ozada, N., Saber-Samandari, S., Nejad, M. G., “On the mechanical and biological properties of bredigite-magnetite (Ca7MgSi4O16-Fe3O4) nanocomposite scaffolds”, Ceramics International, 44 (2018).
  22. Maghsoudlou, M. A., Nassireslami, E., Saber-Samandar, S., Khandan, A., “Bone regeneration using bio-nanocomposite tissue reinforced with bioactive nanoparticles for femoral defect applications in medicine”, Avicenna J. Med. Biotechno, 2 (2020).
  23. Naresh, U., Kumar, R. J., Naidu, K. C. B., “Optical, magnetic and ferroelectric properties of Ba0. 2Cu0. 8-xLaxFe2O4 (x= 0.2–0.6) nanoparticles”, Ceramics International, 45(6) (2019) 7515-7523.
  24. Khandan, A., Saber-Samandari, S., Telloo, M., Kazeroni, Z. S., Esmaeili, S., Sheikhbahaei, E., Kamyab, B., “A mitral heart valve prototype using sustainable polyurethane polymer: fabricated by 3D bioprinter, tested by molecular dynamics simulation”, AUT Journal of Mechanical Engineering, (2020).
  25. Bagherifard, A., Joneidi Yekta, H., Akbari Aghdam, H., Motififard, M., Sanatizadeh, E., Ghadiri Nejad, M., Khandan, A., “Improvement in osseointegration of tricalcium phosphate-zircon for orthopedic applications: an in vitro and in vivo evaluation”, Medical & Biological Engineering & Computing, 58 (2020) 1681-1693.
  26. Esmaeili, S., Aghdam, H. A., Motififard, M., Saber-Samandari, S., Montazeran, A. H., Bigonah, M., Khandan, A., “A porous polymeric–hydroxyapatite scaffold used for femur fractures treatment: fabrication, analysis, and simulation”, European Journal of Orthopaedic Surgery & Traumatology, 30(1) (2020) 123-131.
  27. Rad, A. S., Samipour, V., Movaghgharnezhad, S., Mirabi, A., Shahavi, M. H., Moghadas, B. K., “X12N12 (X= Al, B) clusters for protection of vitamin C; molecular modeling investigation”, Surfaces and Interfaces, 15 (2019) 30-37.
  28. Aghdam, H. A., Sanatizadeh, E., Motififard, M., Aghadavoudi, F., Saber-Samandari, S., Esmaeili, S., Khandan, A., “Effect of calcium silicate nanoparticle on surface feature of calcium phosphates hybrid bio-nanocomposite using for bone substitute application”, Powder Technology, 361 (2020) 917-929.
  29. Moradi-Dastjerdi, R., Aghadavoudi, F., “Static analysis of functionally graded nanocomposite sandwich plates reinforced by defected CNT”, Composite Structures, 200 (2018) 839-848.
  30. Moradi-Dastjerdi, R., Behdinan, K., “Thermoelastic static and vibrational behaviors of nanocomposite thick cylinders reinforced with grapheme”, Steel Compos. Struct., 31 (2019) 529-539.
  31. Moradi‐Dastjerdi, R., Payganeh, G., Tajdari, M., “Resonance in functionally graded nanocomposite cylinders reinforced by wavy carbon nanotube”, Polymer Composites,38 (2017) E542-E552.
  32. Moradi-Dastjerdi, R., Behdinan, K., Safaei, B., Qin, Z., “Buckling behavior of porous CNT-reinforced plates integrated between active piezoelectric layers”, Engineering Structures,222 (2020) 111-141.
  33. Mirzaalian, M., Aghadavoudi, F., Moradi-Dastjerdi, R., “Bending behavior of Sandwich plates with aggregated CNT-reinforced face sheets”, Journal of Solid Mechanics,11(1) (2019) 26-38.
  34. Mousavi, H., Mohammadi, M., Aghdam, H. A., “Injury to the infrapatellar branch of the saphenous nerve during ACL reconstruction with hamstring tendon autograft: a comparison between oblique and vertical incisions”, Archives of Bone and Joint Surgery,6(1) (2018) 52-58.
  35. Raisi, A., Asefnejad, A., Shahali, M., Kazerouni, Z. A. S., Kolooshani, A., “Saber‑Samandari, S., Khandan, A., “Preparation, Characterization, and Antibacterial Studies of N, O‑carboxymethyl Chitosan as a Wound Dressing for Bedsore Application”, Archives of Trauma Research, 9(4) (2020) 181-187.
  36. Akbari Aghdam, H., Bagherifard, A., Motififar, M., Parvizi, J., Sheikhbahaei, E., Esmaeili, S., Khandan, A., “Developing A Novel Porous Bio-Photopolymer-SWCNT-Ceramic Fabricated by Digital Light Processing Technology for Orthopedic Applications”, The Archives of Bone and Joint Surgery, (2020) https://doi.org/10.22038/abjs.2020.43409.2189
  37. Kamyab Moghadas, B., Azadi, M., “Fabrication of Nanocomposite foam by supercritical CO2 technique for application in tissue engineering”, Journal of Tissues and Materials,2(1) (2019) 23-32.
  38. Shirani, K., Sheikhbahaei, E., Torkpour, Z., Nejad, M. G., Moghadas, B. K., Ghasemi, M., Khandan, A., “A narrative review of COVID-19: the new pandemic disease”, Iranian Journal of Medical Sciences, 45(4) (2020) 233-237.
  39. Raisi, A., Asefnejad, A., Shahali, M., Doozandeh, Z., Kamyab Moghadas, B., Saber-Samandari, S., Khandan, A., “A soft tissue fabricated using freeze-drying technique with carboxymethyl chitosan and nanoparticles for promoting effects on wound healing”, Journal of Nanoanalysis, (2020).
  40. Moghadas, B. K., Safekordi, A. A., Honarvar, B., Kaljahi, J. F., Yazdi, S. A. V., “Experimental Study of Dorema aucheri Extraction with Supercritical Carbon Dioxide”, Asian J. Chem., 24(8) (2012) 3691-3694.
  41. Saber-Samandari, S., Gross, K. A., “Amorphous calcium phosphate offers improved crack resistance: A design feature from nature?”, Acta biomaterialia, 7(12) (2011) 4235-4241.
  42. Sahmani, S., Saber-Samandari, S., Khandan, A., Aghdam, M. M., “Influence of MgO nanoparticles on the mechanical properties of coated hydroxyapatite nanocomposite scaffolds produced via space holder technique: fabrication, characterization and simulation”, Journal of the mechanical behavior of biomedical materials, 95 (2019) 76-88.
  43. Heydari-Meybodi, M., Saber-Samandari, S., Sadighi, M., “3D multiscale modeling to predict the elastic modulus of polymer/nanoclay composites considering realistic interphase property”, Composite Interfaces,23(7) (2016) 641-661.
  44. Salmani, M. M., Hashemian, M., Yekta, H. J., Nejad, M. G., Saber-Samandari, S., Khandan, A., “Synergic effects of magnetic nanoparticles on hyperthermia-based therapy and controlled drug delivery for bone substitute application”, Journal of Superconductivity and Novel Magnetism, 33 (2020) 2809-2820.
  45. Moghadas, B. K., Safekordi, A. A., Honarvar, B., Kaljahi, J. F., Yazdi, S. V., “Supercritical extraction of flavonoid compounds from Dorema aucheri Boiss. experimental and modeling using CH2Cl2 as co-solvent”, Asian Journal of Chemistry, 24(8) (2012) 35-43.
  46. Sun, C., Yarmohammadi, A., Isfahani, R. B., Nejad, M. G., Toghraie, D., Fard, E. K., Khandan, A., “Self-healing polymers using electrosprayed microcapsules containing oil: Molecular dynamics simulation and experimental studies”, Journal of Molecular Liquids,325 (2021) 115-182.
  47. Kamarian, S., Bodaghi, M., Isfahani, R. B., Song, J. I., “Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets”, Journal of Sandwich Structures & Materials, (2020) #1099636220935557.
  48. Kamarian, S., Bodaghi, M., Isfahani, R. B., Song, J. I., “A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams”, Mechanics Based Design of Structures and Machines, 37 (2020) 1-24.
  49. Moghadas, B. K., Akbarzadeh, A., Azadi, M., Aghili, A., Rad, A. S., Hallajian, S., “The morphological properties and biocompatibility studies of synthesized nanocomposite foam from modified polyethersulfone/graphene oxide using supercritical CO2”, Journal of Macromolecular Science, Part A, 57(6) (2020) 451-460.
  50. Moeini, M., Barbaz Isfahani, R., Saber-Samandari, S., Aghdam, M. M., “Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene–epoxy nanocomposites”, Molecular Simulation,46(6) (2020) 476-486.
  51. Ayatollahi, M. R., Moghimi Monfared, R., Barbaz Isfahani, R., “Experimental investigation on tribological properties of carbon fabric composites: effects of carbon nanotubes and nano-silica”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(5) (2019) 874-884.
  52. Maghsoudlou, M. A., Isfahani, R. B., Saber-Samandari, S., Sadighi, M., “Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations”, Composites Part B: Engineering,175 (2019) 107119.
  53. Fada, R., Shahgholi, M., Karimian, M., “Improving the mechanical properties of strontium nitrate doped dicalcium phosphate cement nanoparticles for bone repair application”, Ceramics International,47(10)(2021) 14151-14159.
  54. Fada, R., Farhadi Babadi, N., Azimi, R., Karimian, M., Shahgholi, M., “Mechanical properties improvement and bone regeneration of calcium phosphate bone cement, Polymethyl methacrylate and glass ionomer”, Journal of Nanoanalysis, 25 (2020) 56-67.
  55. Abbasi-Rad, S., Akbari, A., Malekzadeh, M., Shahgholi, M., Arabalibeik, H., Rad, H. S., “Quantifying cortical bone free water using short echo time (STE-MRI) at 1.5 T”, Magnetic resonance imaging, 71 (2020) 17-24.
  56. Malekzadeh, M., Abbasi-Rad, S., Shahgholi, M., Naghdi, P., Hoseini, M. S., Yazdi, N. A., Rad, H. S., “Design and validation of synchronous QCT calibration phantom: practical methodology”, Journal of medical imaging and radiation sciences, 50(1) (2019) 157-162.
  57. Shahgholi, M., Oliviero, S., Baino, F., Vitale-Brovarone, C., Gastaldi, D., Vena, P., “Mechanical characterization of glass-ceramic scaffolds at multiple characteristic lengths through nanoindentation”, Journal of the European Ceramic Society, 36(9) (2016) 2403-2409.
  58. Mirsasaani, S. S., Bahrami, M., Hemati, M., “Effect of Argon laser Power Density and Filler content on Physico-mechanical properties of Dental nanocomposites”, Bull. Env. Pharmacol. Life Sci,5 (2016) 28-36.
  59. Mirsasaani, S. S., Hemati, M., Dehkord, E. S., Yazdi, G. T., Poshtiri, D. A., “Nanotechnology and nanobiomaterials in dentistry”, Nanobiomaterials in Clinical Dentistry, (2019) 19-37.
  60. Mirsasaani, S. S., Ghomi, F., Hemati, M., Tavasoli, T., “Measurement of solubility and water sorption of dental nanocomposites light cured by argon laser”, IEEE transactions on nanobioscience, 12(1) (2013) 41-46.
  61. Maghsoudi, A., Yazdian, F., Shahmoradi, S., Ghaderi, L., Hemati, M., Amoabediny, G., “Curcumin-loaded polysaccharide nanoparticles: Optimization and anticariogenic activity against Streptococcus mutans”, Materials Science and Engineering: C,75 (2017) 1259-1267.
  62. Nassireslami, E., Motififard, M., Kamyab Moghadas, B., Hami, Z., Jasemi, A., Lachiyani, A., Khandan, A., “Potential of magnetite nanoparticles with biopolymers loaded with gentamicin drug for bone cancer treatment”, Journal of Nanoanalysis, 23 (2020) 56-64.
  63. Khandan, A., Nassireslami, E., Saber-Samandari, S., Arabi, N., “Fabrication and Characterization of Porous Bioceramic-Magnetite Biocomposite for Maxillofacial Fractures Application”, Dental Hypotheses, 11(3) (2020) 74-79.
  64. Nassireslami, E., Nikbin, P., Amini, E., Payandemehr, B., Shaerzadeh, F., Khodagholi, F., Sharifzadeh, M., “How sodium arsenite improve amyloid β-induced memory deficit?”, Physiology & behavior, 163 (2016) 97-106.
  65. Noshadi, B., Ercetin, T., Luise, C., Yuksel, M. Y., Sippl, W., Sahin, M. F., Gulcan, H. O., “Synthesis, Characterization, Molecular Docking, and Biological Activities of Some Natural and Synthetic Urolithin Analogs”, Chemistry & Biodiversity, 17(8) (2020) e2000197.
  66. Yuzugulen, J., Noshadi, B., Shukur, K., Sahin, M. F., Gulcan, H. O., “The metabolites of ellagitannin metabolism urolithins display various biological activities”, EMU Journal of Pharmaceutical Sciences, 2(2) (2019) 102-110.
  67. Morteza, P. H., Reza, F. M., Nasrin, S., Ehsan, N., Ali, R. S., Amini, M., “Deterioration of parabens in preserved magnesium hydroxide oral suspensions”, J. Appl. Sci, 7 (2007) 3322-3325.
  68. Mirsasaani, S. S., Bahrami, M., & Hemati, M., “Effect of Argon laser Power Density and Filler content on Physico-mechanical properties of Dental nanocomposites”, Bull. Env. Pharmacol. Life Sci, 5 (2016) 28-36.
  69. Mirsasaani, S. S., Hemati, M., Dehkord, E. S., Yazdi, G. T., Poshtiri, D. A., “Nanotechnology and nanobiomaterials in dentistry”, Nanobiomaterials in Clinical Dentistry, (2019).19-37.
  70. Mirsasaani, S. S., Ghomi, F., Hemati, M., Tavasoli, T., “Measurement of solubility and water sorption of dental nanocomposites light cured by argon laser”, IEEE transactions on nanobioscience, 12(1) (2013) 41-46.
  71. Maghsoudi, A., Yazdian, F., Shahmoradi, S., Ghaderi, L., Hemati, M., Amoabediny, G., “Curcumin-loaded polysaccharide nanoparticles: Optimization and anticariogenic activity against Streptococcus mutans”, Materials Science and Engineering: C, 75 (2017) 1259-1267.
  72. Akherat Doost, H., Majles Ara, M. H., Koushki, E., “Theoretical Analysis of the Optical Properties of Gold Nanoparticles Using DDA Approximation”, Int. J. Nanosci. Nanotechnol, 14(2) (2018) 153-158.
  73. Jafarirad, S., Kordi, M., & Kosari-Nasab, M., “Investigation on Microstructure, Lattice and Structural Chemistry of Biogenic Silver Nanoparticles”, Int. J. Nanosci. Nanotechnol, 14(3) (2018) 197-206.

 

International Journal of Nanoscience and Nanotechnology
Volume 17, Issue 2
Spring 2021
Pages 77-90